YOU TUBE HOP FOR NEW STAMPIN UP PRODUCTS 2019

Today demonstrators belonging to Team Scrimpy have joined together and created a series of videos for you to watch all showcasing products and DSP's from the new catalogue for 2019/2020 in the format of a Hop. Each demonstrator will give you the link to the next video. Please be kind enough to subscribe to each demonstrator as it helps their channel to grow :)

Here is the link to Helen Chandlers video for the Hop: Clickable Link for Helen Chandler's YT Channel.

I chose to create a Mini Album using the Come Sail Away DSP. I have split my video into two parts. Both videos are shown at the bottom of this post :)

A CLICKABLE LINK FOR MY STAMPIN UP STORE IF YOU WISH TO ORDER THE PRODUCTS

MATERIAL LIST

The products I used are as follows:

149481 *Come Sail Away DSP
149552 *Come Sail Away Memories and More Card Pack
147003 Neutrals 12 x 12 Assortment Card pack ( I used Night of Navy and Crumb Cake)
149483 *Bakers Twine
144141 Gold Faceted Gems
110755 Multipurpose Liquid Glue
138309 Fine Tip Glue Pen
147110 Night of Navy Ink Pad
147116 Crumb Cake Ink Pad
106584 Vellum
149518 Delightful Tag Topper

ADDITIONAL ITEMS

149482 *Sail Away Trinkets
151066 *Sailing Home Stamps and Die Set Bundle
149577 *High Seas 3D Embossing Folder

or ...... * To purchase the whole Sail Away Suite 152175

MEASUREMENTS

COVER: Cut from plain card stock 7 1/2" x 12"
                Score at 3 1/2", 4", 4 1/2", 5", 5 1/2", 6", 6 1/2", 7", 7 1/2", 11" and 11 1/4"
                Cut 2 pieces of DSP for the front and back cover 3 1/4" x 7 1/4"

PAGES: Cut 2 pieces od DSP 3 1/4" x 7 3/8"
               Cut 2 pieces of DSP 6 1/2" x 7 3/8" - Fold in half and glue together along the long side
               and the bottom edge.

CARD CLOSURE: 3" x 4" card from the card pack and a backing piece of DSP to the same
               measurement as the card.

TAG WITH POCKET: 2" x 12" from DSP. Score at 7 1/2" and 11"

TAG BOOKLET: 4 1/2" x 7 1/2" from Plain Card stock. Score and fold at 2 1/4"

For Full Instructions watch both videos on my YT Channel.

PART ONE:

PART TWO:

CREATING A MINI JOURNAL USING UP DSP

So the last set of videos were all about using up those last pieces of DSP and scraps to create a Mini Journal.

Because you are using up scraps it is difficult to make a material list, so Ive added a few items I have mentioned in the videos. Remember that some of these items are being discontinued at the very beginning of June 2019. So you may need to act quickly if you wish to place an order.

MY STAMPIN UP ONLINE STORE - CLICKABLE LINK :)

Delightfully Detailed Laser Cut Speciality Paper 146907

Wink of Stella 141897

Basic Gray Ink Pad  149165

Fine Tip Glue Pen 138309

Silicone Craft Sheet 127853


Im also not putting up any instructions as everything you need to know is in the videos. I have added the links for all 4 below. Enjoy! xx

Please share with your friends where you got the inspiration from and dont forget to click subscribe and the notification bell.

PART ONE:

PART TWO:

PART THREE:

PART FOUR:

FLORAL ROMANCE DSP: 2 SHEETS = 6 NOTEBOOKS

A little later in the day than planned but hey ho got there in the end :) The 5th Project for the Use It Up projects is a nifty little idea to make 6 Mini Notebooks using only two 12 x 12 sheets.

MATERIAL LIST

12 X 12 Pear Pizzazz Card stock 131290
(or Subtles 12 x 12 Card stock pack 147004)
Floral Romance DSP 148586
Butterfly Duet Punch 148523
Tombow Glue 110755

Additional Materials
( I have given the Stampin Up Products I would have used if I had them :) )

A4 note paper to make the pages ( 3 sheets will give you enough pages for 2 books)
Detailed Trio Punch 146320 (for corner or decorative corner punch)
1 3/8" Scallop Circle Punch 146139
Metallic Pearls 146282
Burlap Ribbon 141487
Strong sewing thread

Optional Products

Old Olive Stampin Pad 147090
Basic Gray Stampin Pad (Ideal for stamping the butterflies) 149165
Butterfly Gala Stamp Set 148580
(or save some pennies and buy the punch and stamp set together: Butterfly Bundle 150599)
Paper Piercing Tool 126189


CLICK THIS LINK FOR MY STAMPIN' UP! STORE


INSTRUCTIONS AND MEASUREMENTS

1 - Set yourself up to get a production line going ;)

2 - Cut 6 of the covers using Pear Pizzazz 6" x 4". Score at 3" fold but dont burnish at this point.

      Open each piece out flat on one pile.

3 - From the DSP Floral Romance sheet cut a 3 3/4" strip. Turn it and cut 4 pieces measuring 2 3/4".
     Corner round and ink up these if you wish.

4 - Cut the A4 papers to 5 1/2" x 3 3/4" (3 sheets cut to these measurements makes enough pages for
      two notebooks) Fold each of the pages in half. Corner round the pages. Stack 6 of these pages
      ontop of each other to make your booklet.

5 - Lay the pages on top of the inside of the cover and hold in position with binder clips of
     paperclips making sure the fold lines of the pages line up with the fold line of the cover.

6 - Poke two holes approx 3/4" from each end through all the layers at the fold mark.

7 - With strong thread ( not sewing cotton) sew all the layers together as shown in the video
      ( link below).

8 - Fold and burnish the booklet. Adhere the cover Mats to the front and back cover.

9 - Lay some ribbon across the front and wrap around to the back. Hold in position with a dot of
     glue. Punch a Scalloped Circle and ink the edges. Attach to the centre of the ribbon which will
     help to secure the ribbon in place. Decorate with both DSP and Vellum Butterflies. Add Flat
     Back Pearls to the Butterfly bodies.

10 - Tie the ends of the ribbons into a pretty bow and voila!! complete :)


Dont forget to click subscribe and that bell to receive notifications of any new videos I do and leave me a comment - let me know what you think :) xx

   

PETAL PROMENADE BOOK MARK

 Here is all the info you need to make the magnetic book marks using up your 2019 DSP Petal Promenade. Enjoy!

MATERIAL LIST

A4 Mossy Meadow Cardstock 133683

DSP Petal Promenade 146913

Butterfly Duet Punch 148523

Tombow Glue 110755

Additional items:

Ribbon

2 x Magnets

Flatback pearls

CLICK THIS LINK FOR MY ONLINE STAMPIN' UP! STORE

INSTRUCTIONS AND MEASUREMENTS

1 -  Cut a strip of Mossy Meadow Cardstock 1 ¾” x  11 5/8”. Fold in half lengthwise and burnish the 

      fold.

2 – Cut a strip of decorative paper  1 ½” x 5 ½” . Corner round and ink up the edges if you wish and 

     then glue to the front of the bookmark base.

3 – Decorate the front with 3 of the small punched butterflies and flat back pearls for their heads.

4 – Follow the instructions on the video for attaching the magnets ( link below) and punch 2  small circles from scraps of the DSP and glue on top of the magnets.

5 – Add a ribbon bow around the top of the bookmark fold line.

STAMPIN' UP! NOTE PAPER BOX

We are on the third project for this week which is a mini Note Paper Box. Make it for yourself or a a gift for someone :)

MATERIAL LIST

A4 Petal Pink 147009
(alternative colour Calypso Coral 124392)
(Subtles A4 Card stock Pack which contains both of these colours 147000)
DSP Petal Promenade 146913
Butterfly Duet Punch 148523
Botanical Bliss Stamp Set 146612
Every Day Label Punch 144668
Basic Grey Stamp Pad 149165
Tombow Glue 110755

Additional items:
Ribbon
Charm
Flatback Gemstones or Pearls


PLEASE SUPPORT MY ONLINE STORE AND CLICK ON THIS LINK TO PURCHASE - THANK YOU xx




INSTRUCTIONS AND MEASUREMENTS

1 - Cut an 8" square from the Designer Series Paper and make up the folded box as shown in the
     video on my YT channel sewcarol. The link is below. Cut a semi circle from the front of the box.

2 - From the plain card, that coordinates with your DSP, cut 1 piece measuring 3 1/8" x 7 1/2". Score at the following measurements 3"and 4 3/8" and burnish the folds well.

3 - Put glue on the base of the box and adhere to the 3" section of the cover towards the back right
     next to the first score line. Then place glue on the back of the box and lift the cover up along
     the back so it is adhered to the back of the box.

4 - Cut a small length of ribbon and add a charm. Loop the ribbon and adhere to the inside lid of the
      box approx 1/2" away from the edge of the cover. Next cut a length of ribbon and adhere one
      end to the inside of the box in about the middle. Punch a circle 1" from the same DSP as you
     made the box and adhere to the top of the ribbon to ''hide'' it.

5 - Cut the mats using the DSP as follows:
      Cover Lid - cut 2 - 3" x 3"
      Cover Back - Cut 1 - 3" x 1 /4"
      Round the corners and ink the edges as required.
      Adhere the mats to the cover.

6 - Stamp a sentiment and punch the label for the top of the cover. Punch some small butterflies from
     the plan card and then some from the DSP. Adhere the label to the top of the box and then the     
     plain butterflies on top. Ben the patterned papers slightly and add them on top of the plain ones.
     Attach some gems to the bodies of the butterflies.

7 - Cut the note papers to measure 2 5/8" square.

8 - For the larger box without the cover use a 12" x 12" DSP and follow the video to make the box.


9 - Cut a plinth from complimenting plain card 4 5/8" square.

10 - Place glue to the base of the box and attach the plinth.

11 - Next cut a length of ribbon and adhere one end to the inside of the box in about the middle.
       Punch a circle 1" from the same DSP as you made the box and adhere to the top of the ribbon
       to ''hide'' it.

12 - Wrap a ribbon around the outer sides of the box. Adhere the two loose ends at the middle front
       of the box, overlapping slightly. Make a bow from the same ribbon and adhere on top of the
       overlapping ribbon ends.

13 - Cut the note papers to measure 4" square.

Click Subscribe to my YT channel and click that bell to receive notifications of any future videos I make. Please feel free to share this blog and my YT tutorials with your friends and groups and if you share the items you make please mention or share the link as to where you got the inspiration from - Thanks xx

STAMPIN' UP! MINI BRAG BOOK

Today's Tutorial is showing you how to make a Mini Brag Book. Another project that could have a multitude of uses.

MATERIAL LIST

A4 Merry Merlot Card Stock 147005 (or the Neutrals A4 pack 146999)
or A4 Petal Pink Card Stock as an alternative and for the Butterflies and Label
DSP Petal Promenade 146913
Butterfly Gala Stamp Set 148580
Butterfly Duet Punch 148523
(or Butterfly Bundle 150599)
Every Day Label Punch 144668
Basic Grey Stamp Pad 149165
Tombow Glue 110755

Additional Items:
Thin Magnets
Flatback Gem stones or Pearls

MY ONLINE STORE IS HERE

INSTRUCTIONS AND MEASUREMENTS


1 - Cut the Merry Merlot Card stock as follows:
     1 -  3 1/4" x 10 1/2"
     1 -  3 1/4" x 10 1/4"
     Score both of these pieces the same and a follows at: 3 1/4", 6 1/2" and 9 3/4"

2 - Fold and lightly burnish each of the score lines, then open back up. Taper the ends of the short
     flaps, you will notice one is longer than the other. Adhere the two pieces together to make one
     long strip by attaching the shorter flap to the other piece of card. ( Attach it to the opposite end of
     where the flap is on the second piece.)  Now concertina fold the card and re-burnish the fold lines.

3 - Cut the Merry Merlot Card stock for the front cover as follows:
      1 -  3 1/2" x 9 5/8"
      Score as follows: 2 1/2", 2 3/4", 6 1/4" and 6 1/2" Fold and burnish the score lines.

4 - Attach the remaining flap of the concertina fold pages to the central panel of the cover.

5 - Add the magnets as shown in the video posted below.

6 - Cut the mats as follows (corner round and ink up the edges if you wish) :
      Front Cover - Cut 2 ( inside and out) 2 1/4" x 3 1/4"
      Back Cover - Cut 2 (inside and out, although you may need to trim the inside piece to fit where
      you have placed your concertina pages) : 3 1/4" x 3 1/4"
      Other Cover Flap - Cut 2 -  2 7/8" x 3 1/4"

7 - Stamp and punch 2 sets of Butterflies. Add the larger one  to the front flap so it is overhanging
      the edge. Stick the second large Butterfly to the inside of the cover making sure that the over
      hanging edges line up.

8 - Punch a label for the back cover and add a sentiment. Adhere one of the smaller Butterflies to
     the label. Adhere the remaining small Butterfly to the inside cover for decoration. Add gems to
    each of the Butterflies.

Click Subscribe to my YT Channel and click that bell so you wont miss out on any future videos. I have created a Playlist for all the Stampin'Up! projects I make :)

STAMPIN' UP! GIFT PACK

This tutorial is using Stamping Up Products to create a Gift Pack.

I used:
A4 Mossy Meadow Cardstock 133683 ( or the Neutrals Pack 146999)
DSP Petal Promenade 146913
Botanical Bliss Stamp Set 146612
Butterfly Gala Stamp Set 148580
Butterfly,Duet Punch 148523
(Butterfly bundle 150599)
Every Day Label Punch 144668
Old Olive Stamp Pad 147090
Tombow Glue 110755

Additional Items:
3/4m Ribbon/Seam Binding
Flat back Pearls or Gems
Items to fill your Gift Pack

My Online Store Is Here

INSTRUCTIONS AND MEASUREMENTS

1 - Cut the Mossy Meadow Card stock to 5" x 10 7/8"
      Score at 3 1/2", 3 3/4", 7 1/4" and 7 1/2"

2 - Using the patterned paper from Petal Promenade cut the following pieces:
     Front x 1:  3 1/4" x 4 3/4"
     Pockets x 2: 3 1/4" x 2 3/8"
     Long Pockets x 2:  1 5/8" x 4 3/4"
     Belly Band x 1: 5 1/2" x 1 1/2" - Score 1/4" at each end and taper the corners of the flaps

3 - Corner round any of the pieces above (apart from the Belly Band) and ink up the edges of your papers if you wish.

4 - Glue into position as shown on the video linked below.

5 - On the outer back pocket glue one end of the ribbon to the centre of the pocket front. Stamp and 
     punch out the butterflies. Adhere the large butterfly on top of the ribbon to cover over the end.

6 - Stamp a sentiment on to a scrap piece of Whisper White card stock. Use the every Day Label
     Punch to punch out the sentiment and glue to the front cover. Adhere the small butterfly to the 
    label and add gemstones / flatback pearls to the butterflies and the label.

7 - Use the Botanical Bliss stamp set to decorate the cover both inside and out as you wish.

7 - Fill the pockets with goodies. The note papers were cut to 2 1/2" x 4" and stamped using the
     Botanical Bliss stamp set. Wrap the ribbon around to create the closure.

STAMPIN' UP! BOTANICAL TAGS WITH THINLITS DIE

Welcome to the first of the Stampin' Up Blog tutorials.
For some reason I was really nervous in the video so Im hoping that if I waffled a load of old rubbish then this pictorial and written view will be helpful :)

I have linked the products I used at the bottom of this post. Enjoy!

1 - Cut a piece of Very Vanilla cardstock to measure 2" wide x 6" long to create the tag base.

2 - Place the floral die at the top of your piece of cardstock. Make sure the die sides are lined up (or centralised if you are using a wider piece of card) with the sides of the card. Use a piece of tape to hold the die in place. Run it through the die cutting machine. Put to one side.

3 - With a scrap piece of DSP (Designer Series Paper) die cut the same shape as you used to create the tag base. Remove the die from the paper and add the outline die piece across the leaves area being careful to align it. Run it through the die cutting machine again and this will release a complete die cut shape. Repeat this process with a piece of Mossy Meadow cardstock together with the vine die.

  

  

4 - Cut away the leaves from both the die cut flowers with small fine pointed scissors.

5 - Place glue on the back of the die cut leaves you will be using and attach to the tag base.

6 - Place glue on the back of the die cut flower and attach to the tag base. Trim off the end leaf off the top of the vine and attach to the tag base next to the leaves. Ink the edges of you tag, attach pockets or any other decorations you so wish at this point

  

Here are pics of the other versions I made using this die set

I hope you enjoyed this project and were inspired to give it a try. Please remember that some of the items are now on limited stock and that Sale-A-Bration ends on the 31st March.
HERE IS THE LINK TO THE VIDEO -

The items I used in this project are (clickable links) :

VERY VANILLA CARDSTOCK

MOSSY MEADOW CARD

PETAL PROMENADE DSP

BOTANICAL TAGS THINLITS DIES

BIG SHOT DIE CUTTING MACHINE

SILICONE CRAFT SHEET

GLUE

MUSIC BACK GROUND STAMP